DIY Restore and Protect

Do you have seemingly impossible to remove marking on your glass? Have you tried EVERYTHING to remove it? Did you know what you are usually being sold will not, and cannot, remove the problem! Showers, Exteriors, Automotive, Marine, But not just glass! – also great for Tiles, Tapware, Porcelain – (sinks, toilet bowls etc), Stainless steel, Chrome… etc … We have the solution for you! Years of development have gone into Restore to get the best possible results, with an environmentally friendly, easy to use cleaner, that has been developed and is made in New Zealand to suit our unique conditions. This is what we use for Glass Restoration. If there was something better, we would be using it!! Restore is super concentrated, the 250ml bottle is enough to clean average mineral staining from 10 to 20 square metres of glass – an average shower will be about 3.5m2 For best results use with our White scrubber pads – please DON’T use a pot scrubber! https://www.diamondfusion.co.nz/product/scrub-pads. ( for tapware or other very delicate surfaces, use on a cloth ) We also have an attachment to use with a power drill  https://www.diamondfusion.co.nz/product/drill-attachment-for-glass-restoration/ These are packed directly out of our bulk supply, labelling is not fancy. We chose to invest in getting the best product available not just unnecessary flash packaging. Only use on a treated surface if you are wanting to remove that product. For severe staining some etched minerals can still be visible, or marking may have been on surface for too long to be successfully removed. very occasionally the only option is to replace the glass. DO NOT use on Black or other non metallic tapware. ALWAYS test surfaces before you use any cleaner. – DO NOT use this on a Diamond Fusion easyClean or Clear Fusion protected surface, it will damage the coating – if you have surface marking on a Diamond Fusion easyClean or Clear Fusion surface,use Restoration Powder, yes we know they are similar names, and it can be confusing, but they are different products from different suppliers....

Clear Fusion™ DIY  is The best DIY Glass protection. An economical and convenient do-it-yourself hand-applied protective coating for glass and silica-based surfaces (Any glass, including exteriors, plus most Tiles, Porcelain hand basins, solar panels) to help make them more stain-resistant and easier to maintain. Like all of our protect products, Clear Fusion DIY is an optically clear liquid, which seals and protects from mineral and environmental build-up. Clear Fusion DIY makes maintenance easier, reduces cleaning time and effort needed, and eliminates the need for harsh chemicals. A bottle covers approximately 20 - 25 square metres (approx $3.16m2), so enough to cover five average 2 sided showers. Coverage does depend on conditions and application Simply re-apply Clear Fusion DIY as required, or occasionally boost with Revitalizer to increase its lifespan. Before application we do suggest pre-cleaning any surface – even brand new – with Diamond Fusion Restore, Glass Rescue or Restoration Powder for best results. This listing is for the bottle of Clear Fusion DIY only, for a kit that includes prep or cleaning poroducts please see https://www.diamondfusion.co.nz/product/clear-fusion-diy-shower-kit/ Note: Clear Fusion V / Clear Fusion DIY is made by DFI, the manufacturer of the worlds best glass protection products, but is a different product, it is NOT DIY Diamond Fusion easyClean, or DIY Clear Fusion Pro See below video for a sample application showing the process Also see the worlds best glass surface cleaner at Sprayway.co.nz

Got a shower to clean? Save your arms on the big jobs with our drill attachment for DIY glass restoration. We do recommend using our NZ developed and made Restore mineral stain remover, Yes you can use other products, but Restore WILL give better and faster results. If the other products worked, we would be using them! What you get is the backing pad, along with the adaptor to put in the standard drill chuck, and two white nylon pads, that attach to the “velcro” style backing pad. Pads may be thinline or thick, they are the same material. Backing pads are usually yellow, but may be other colours. This depends on supply. Additional pads are available here https://www.diamondfusion.co.nz/product/additional-nylon-pads/ Generally work on one white pad per panel of glass, but the harder the marking – so usually the longer its been on the surface – the “fresher” you will want your pad to be. But once the glass is looking OK, they can be rinsed out and used to finish off with. You, of course, will need to provide your own drill, and be careful with it – it’s a power tool, so use the right protective gear. don’t use it in a wet environment or with the water running, and don’t overload the drill, as it could possibly damage it. We are not your Mum, so you're gonna need to use your own common sense here people! Does not incude cleaning product, We highly recommend Restore mineral stain remover as it is formulated and made in NZ for NZ conditions, and is by far the fastest and easiest way to clean glass. If the other products did what they said they did we would use them! Test on an inconspicuous area first. We are not responsible for damage. You will likely also uncover existing damage. Restoration is an attempt to save replacement of the glass. Your glass will not be “new” again. You can of course use this on a bunch of other surfaces, such as Tiles, Stainless steel sinks etc, but the common sense thing kicks in here again...... We arn't there to supervise you, or say, "wait this is dumb", listen to that voice in your head, the pads are a coarse nylon so can scuff a delicate surface. However, that surface is already damaged, so.... It is not suggested to use this attachment on anything other than shower glass or tiles – i.e exterior, automotive, marine etc glass – unless every other method has been tried first. But generally if it's going to noticeably scuff the surface the glass would otherwise have needed to be replaced. We do have Foam pads available that are "less aggressive" on the surface. https://www.diamondfusion.co.nz/product/drill-attachment-for-foam-pad/

A range of all-in-one kits containing our award-winning products and best cleaning tools which ensure your treated surfaces remain in perfect condition for years to come. Each kit has been designed and tested specifically for use with Diamond Fusion easyCLEAN protective coatings to achieve the highest quality results possible. The kits are user-friendly and make cleaning, protecting and maintaining surfaces easier. Use Revitalizer periodically to reduce the importance of drying your surface, and/or to make the regular clean even easier!